Cables and Wires
Cables and Wires
LV Control Cables
Control Cable is a adaptable instrumentation cable made for estimating, control or guideline in the field of cycle mechanization. Multicore Control Cables are extraordinarily made for correspondence and board controls for transmission of DC or Low-Frequency AC signals.
Reliable offer a wide scope of Control Cable up to 1.1 KV Voltage Grades. These control cables are designed as per IS 1554: 88 (Part 1), JSS 51034, IS 9968 standards with the latest correction.
LV Control Cable Models
[pafe-template id=”684″]
[pafe-template id=”687″]
[pafe-template id=”690″]
[pafe-template id=”693″]
[pafe-template id=”696″]
LV Control Cables
Control Cable is a adaptable instrumentation cable made for estimating, control or guideline in the field of cycle mechanization. Multicore Control Cables are extraordinarily made for correspondence and board controls for transmission of DC or Low-Frequency AC signals.
Reliable offer a wide scope of Control Cable up to 1.1 KV Voltage Grades. These control cables are designed as per IS 1554: 88 (Part 1), JSS 51034, IS 9968 standards with the latest correction.
LV Control Cable Models:
[pafe-template id=”684″]
[pafe-template id=”687″]
[pafe-template id=”690″]
[pafe-template id=”693″]
[pafe-template id=”696″]
LV Power Cables
Power cable is a gathering of at least one electrical transmitters normally held along with a general sheath. These cables are utilized for mass transmission of substituting and direct current power.
Power cables are broadly utilized structure wiring for lighting, power and control circuits and electrical supplies.
Reliable offer Power Cables in adaptable just as protected development. Adaptable Power Cables are provided with ISI 694 stamping and Armored Cables with ISI 1554-1 and ISI 7098-1 checking. Dependable Power cables are structured up to and including 1100 voltage Grades.
We additionally give power cable arrangements in high temperature zone going along to IS 9968, JSS 51034, JSS 51038, MIL 16878 and different regional and International guidelines.
LV Power Cable Models
[pafe-template id=”705″]
[pafe-template id=”708″]
[pafe-template id=”711″]
LV Power Cables
Power cable is a gathering of at least one electrical transmitters normally held along with a general sheath. These cables are utilized for mass transmission of substituting and direct current power.
Power cables are broadly utilized structure wiring for lighting, power and control circuits and electrical supplies.
Reliable offer Power Cables in adaptable just as protected development. Adaptable Power Cables are provided with ISI 694 stamping and Armored Cables with ISI 1554-1 and ISI 7098-1 checking. Dependable Power cables are structured up to and including 1100 voltage Grades.
We additionally give power cable arrangements in high temperature zone going along to IS 9968, JSS 51034, JSS 51038, MIL 16878 and different regional and International guidelines.
LV Power Cable Models:
[pafe-template id=”705″]
[pafe-template id=”708″]
[pafe-template id=”711″]
Instrumentation Signal Cables
Instrumentation Signal Cables minimize noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations. These cables are designed for use in communication and instrumentation applications in and around process industries like oil, petrochemicals, cement, steels & sponges, power generations & others.
Instrumentation Signal Cable Models
[pafe-template id=”715″]
[pafe-template id=”718″]
[pafe-template id=”721″]
[pafe-template id=”724″]
[pafe-template id=”727″]
Instrumentation Signal Cables
Instrumentation Signal Cables minimize noise and signal interference, delivering clean signals in harsh environments and general manufacturing operations. These cables are designed for use in communication and instrumentation applications in and around process industries like oil, petrochemicals, cement, steels & sponges, power generations & others.
Instrumentation Signal Cable Models:
[pafe-template id=”715″]
[pafe-template id=”721″]
[pafe-template id=”724″]
[pafe-template id=”727″]
RTD Cables
RTD links are utilized to convey the RTD signals to the control room or field mounted instruments. Contingent upon the setup, they are accessible in three wires, four wires for simplex and, six and eight wire for duplex RTD. These RTD cables are fabricated according to BS 5308 Part 1 and Part 2, IS 1554, EN 50288-7, IS 7098, DIN 43760, JSS 51038 norms with most recent correction.
RTD Cable Models
[pafe-template id=”802″]
[pafe-template id=”805″]
[pafe-template id=”808″]
[pafe-template id=”816″]
[pafe-template id=”819″]
[pafe-template id=”824″]
[pafe-template id=”827″]
[pafe-template id=”832″]
RTD Cables
RTD links are utilized to convey the RTD signals to the control room or field mounted instruments. Contingent upon the setup, they are accessible in three wires, four wires for simplex and, six and eight wire for duplex RTD. These RTD cables are fabricated according to BS 5308 Part 1 and Part 2, IS 1554, EN 50288-7, IS 7098, DIN 43760, JSS 51038 norms with most recent correction.
RTD Cable Models:
[pafe-template id=”802″]
[pafe-template id=”805″]
[pafe-template id=”808″]
[pafe-template id=”816″]
[pafe-template id=”819″]
[pafe-template id=”832″]
Thermocouple Cables
Thermocouple Cables are utilized to quantify the temperature directly. Thermocouple Extension or Compensating wires are just used to broaden a thermocouple signal from a sensor to instrument for readings.
Thermocouple Models
[pafe-template id=”736″]
[pafe-template id=”739″]
[pafe-template id=”743″]
[pafe-template id=”746″]
[pafe-template id=”751″]
[pafe-template id=”754″]
[pafe-template id=”759″]
[pafe-template id=”762″]
[pafe-template id=”768″]
[pafe-template id=”774″]
[pafe-template id=”780″]
[pafe-template id=”786″]
[pafe-template id=”789″]
[pafe-template id=”794″]
[pafe-template id=”727″]
Thermocouple Cables
Thermocouple Cables are utilized to quantify the temperature directly. Thermocouple Extension or Compensating wires are just used to broaden a thermocouple signal from a sensor to instrument for readings.
Thermocouple Models:
[pafe-template id=”736″]
[pafe-template id=”739″]
[pafe-template id=”743″]
[pafe-template id=”746″]
[pafe-template id=”751″]
[pafe-template id=”754″]
[pafe-template id=”759″]
[pafe-template id=”762″]
[pafe-template id=”774″]
[pafe-template id=”780″]
[pafe-template id=”786″]
[pafe-template id=”789″]
[pafe-template id=”696″]
[pafe-template id=”727″]
Fire Survival Cables
Fire Survival Cables are utilized in the establishments where essential circuits are needed to proceed with activity enduring an onslaught conditions. In all debacle, fire smoke head and poisonous exhaust are the principle obstructions to safe departure of a building. A significant commitment towards defeating these perils is the utilization of fire survival cables and halogen free cables.
Fire Resistance Cable
XLPE / Silicon insulated
Fire Survival Cables
Fire Survival Cables are utilized in the establishments where essential circuits are needed to proceed with activity enduring an onslaught conditions. In all debacle, fire smoke head and poisonous exhaust are the principle obstructions to safe departure of a building. A significant commitment towards defeating these perils is the utilization of fire survival cables and halogen free cables.
Fire Resistance Cable
XLPE / Silicon insulated
High Temperature Cables
High Temperature cable are included in thermocouple cable, RTD cable, control cable, etc. You can access these cable individually from that classification.
High Temperature Cable
High Temperature Cable – 700°C
High Temperature Cables
High Temperature cable are included in thermocouple cable, RTD cable, control cable, etc. You can access these cable individually from that classification.
High Temperature Cable
High Temperature Cable – 700°C
Heat Resistance Cables
Reliable offers a scope of single & multi-core Heat Resistance Cable for temperature up to 800°C. Our Heat Resistance Power Cables are reasonable to oppose in compound, fire and fire atmosphere. These HR Cables are utilized in Glass, Cement, Power generation, Steel and Sponge plant and so on.
Heat Resistance Cable Models
[pafe-template id=”844″]
[pafe-template id=”847″]
[pafe-template id=”851″]
[pafe-template id=”857″]
Heat Resistance Cables
Reliable offers a scope of single & multi-core Heat Resistance Cable for temperature up to 800°C. Our Heat Resistance Power Cables are reasonable to oppose in compound, fire and fire atmosphere. These HR Cables are utilized in Glass, Cement, Power generation, Steel and Sponge plant and so on.
Heat Resistance Cable Models:
[pafe-template id=”844″]
[pafe-template id=”847″]
[pafe-template id=”851″]
[pafe-template id=”857″]
Lead Wires/Hookup Wires
Reliable provide expansive scope of Lead wire or Hook up wires with different PVC insulations. Application territories are Drives, Panel, Chemical Plants, Laboratories, and Making Electrical Connections and so forth.
Lead Wire Models
Lead Wire
PTFE insulated – 260°C
Lead Wire
PVC Insulated (Class-5) – 90°C
Lead Wire
PVC Insulated (Class-1/Class-2) – 85°C
Lead Wire
FEP insulated – 200°C
Lead Wires/Hookup Wires
Reliable provide expansive scope of Lead wire or Hook up wires with different PVC insulations. Application territories are Drives, Panel, Chemical Plants, Laboratories, and Making Electrical Connections and so forth.
Lead Wire Models:
Lead Wire
PTFE insulated – 260°C
Lead Wire
PVC Insulated (Class-5) – 90°C
Lead Wire
PVC Insulated (Class-1/Class-2) – 85°C
Lead Wire
FEP insulated – 200°C
Special Cables & Sleeves
DC Solar Photovoltaic Cables
Load cell cables
Electron Beam Irradiated Cable
Network cables
Sleeves
Digital Linear Heat Sensing Cables
Special Cables & Sleeves
DC Solar Photovoltaic Cables
Load cell cables
Electron Beam Irradiated Cable
Network cables
Sleeves
Digital Linear Heat Sensing Cables
Mineral Insulated Cables
We have top notch fabricating plant for creating wide scope of Mineral insulated (MI Cable), metal-sheathed cable. The uses of MI Cable are numerous, such as blast furnace, atomic research, nuclear reactors, Kilns and many more. We give standard as well as custom-built cables according to the customer need/ application requirement. We have entirely adaptable lines so consistently prepared to fulfill the need.
At least one wire-like conveyors (centers) are implanted in a high protection quality MGO and squeezed into a metal cylinder (sheath) made of oxidation and consumption safe material. The whole blend is then handled utilizing appropriate shaping strides to acquire the last dimensions.Due to great Flexibility, Excellent mechanical quality, and weight obstruction, mineral protected Thermocouples/RTD’s can be introduced in complex establishments.
Mineral Insulated Cable Models
Mineral Insulated Thermocouple Cable
Mineral insulated thermocouple cables have inner conductors of Thermocouple base material as per Standard ASTM E 585/585M and ASTM E 839.
Mineral Insulated RTD Cables
Mineral insulated cables for RTDs have inner conductors of copper, copper-nickel alloys, nickel etc. metals.
Mineral Insulated Heating Cable
Mineral Insulated Heating Cables are constructed with a solid resistor element embedded in highly compacted mineral insulation. MI cables are built to handle high temperature, high wattage applications.
Mineral Insulated Copper Cable (MI Power Cable)
Mineral Insulated Copper cable is used as an electric cable for critical areas of plant and follows standard of IEC/EN 60702 Part 1. It has two voltage grade 500V & 750V.
SPNDS (Self Powered Neutron Detectors)
Self-Powered Neutron Detectors are effectively as incoreflux monitors in nuclear power reactors.The typical SPND is a coaxial cable consisting of an inner Electrode (the emitter), surrounded by insulation and an outer electrode (the collector).
Coaxial / Triaxial Cables
Triaxial cable is a type of electrical cable similar to coaxial cable, but with the addition of an extra layer of insulation and a second conducting sheath. It Provides Greater bandwidth and rejection of interference than coax.
Mineral Insulated Cables
We have top notch fabricating plant for creating wide scope of Mineral insulated (MI Cable), metal-sheathed cable. The uses of MI Cable are numerous, such as blast furnace, atomic research, nuclear reactors, Kilns and many more. We give standard as well as custom-built cables according to the customer need/ application requirement. We have entirely adaptable lines so consistently prepared to fulfill the need.
At least one wire-like conveyors (centers) are implanted in a high protection quality MGO and squeezed into a metal cylinder (sheath) made of oxidation and consumption safe material. The whole blend is then handled utilizing appropriate shaping strides to acquire the last dimensions.Due to great Flexibility, Excellent mechanical quality, and weight obstruction, mineral protected Thermocouples/RTD’s can be introduced in complex establishments.
Mineral Insulated Cable Models:
Mineral Insulated Thermocouple Cable
Mineral insulated thermocouple cables have inner conductors of Thermocouple base material as per Standard ASTM E 585/585M and ASTM E 839.
Mineral Insulated RTD Cables
Mineral insulated cables for RTDs have inner conductors of copper, copper-nickel alloys, nickel etc. metals.
Mineral Insulated Heating Cable
Mineral Insulated Heating Cables are constructed with a solid resistor element embedded in highly compacted mineral insulation. MI cables are built to handle high temperature, high wattage applications.
Mineral Insulated Copper Cable (MI Power Cable)
Mineral Insulated Copper cable is used as an electric cable for critical areas of plant and follows standard of IEC/EN 60702 Part 1. It has two voltage grade 500V & 750V.
SPNDS (Self Powered Neutron Detectors)
Self-Powered Neutron Detectors are effectively as incoreflux monitors in nuclear power reactors.The typical SPND is a coaxial cable consisting of an inner Electrode (the emitter), surrounded by insulation and an outer electrode (the collector).
Coaxial / Triaxial Cables
Triaxial cable is a type of electrical cable similar to coaxial cable, but with the addition of an extra layer of insulation and a second conducting sheath. It Provides Greater bandwidth and rejection of interference than coax.